 |
 |
 |
 |
 |
|
 |
|
 |
| All cattle waterers are NOT created equal. CANCRETE has been engineered to withstand harsh winter, hot summer and heavy cattle use by Canadian and U.S.A. producers. |
 |
C75SWEM |
|
|
C150 |
|
C250 |
|
|
|
C350 |
|
C450 |
|
|
|
C550 |
Nobody knows better than a cattleman the importance of water to cattle gain and condition! The last thing you need is waterer problems in -40F. This waterer can withstand the abuse of our climate and the cattle. Proven success in all the major feedlots, Cancrete comes out on top. Don ’t Make a Purchase. Make an Investment!!
| To make a concrete waterer that will last
through years of use, you need the best in concrete technology matched
with the best of components. Air entrained concrete and superior attention to quality control throughout the entire precast process is the key to Cancrete durability. Air entraining produces microscopic air pockets that allow any moisture in the concrete to expand and contract in these pockets, not in the concrete itself. The result is a super strong hull that can weather the freeze / thaw cycle without cracking. It’s no big secret, just a lot of hard work and attention to the details. |
|
Heavy gauge Stainless Steel is used on the valve cover, service door
and all hardware Easy access through the large service door. Precast hulls are made from steel reinforce, 6000 PSI, air entrained, sulphate resistant concrete. A model for any size pen of cattle, horses or bison |
 |
Deep trough bowls are easy to clean and have 2 funnel drains. No sharp corners. Bowls are epoxy coated providing chemical protection from sodium, manure acid and silage
|
CANCRETE CATTLE WATERERS - SPECIFICATIONS & PRODUCT NOTES
| Model | No.of Head | Dimensions | Primary Element | Aux.Element | Weight | Capacity |
| C150 | 1-200 | 33”L x 36”W x 25”H | 700 W | 1 x 98 W | 800 lbs | 19 gal. |
| C250 | 200-300 | 37”L x 36”W x 25”H | 700 W | 1 x 98 W | 1000 lbs | 28 gal. |
| C350 | 300-400 | 43”L x 36”W x 25”H | 1000 W | 2 x 98 W | 1100 lbs | 35 gal. |
| C450 | 400-500 | 69”L x 36”W x 25”H | 1000 W | 2 x 98 W | 1300 lbs | 68 gal. |
| C550 | 500-600 | 93”L x 36”W x 25”H | 1000 W | 2 x 98 W | 2350 lbs | 120 gal. |
ALL NEW! : MODEL C75SWEM
|
Model |
No.of Head |
Dimensions |
Primary Element |
Aux.Element |
Weight |
Capacity |
|
C75SWEM |
400-500 |
78" x 36"W x 25"H |
700 W |
2 x 98 W |
1400 lbs |
68 gal. |
NOTES:
• Shipping weights are approximate.
• Dimensions are taken from measurements of the base of the hull, height is to
top of drinking lip on bowl.
• All standard models are 110v. If waterer is reconfigured to 220v, then
auxiliary elements are 300W not 98W. A surcharge will apply for models converted
to 220v.
• Standard valve assembly is
3/4” Kerrek Valve W/6” Ball. Model C550 uses a 1” “Bob” brass valve. Hawkeye
plastic valves and plastic floats are available on request.
Cancrete uses the finest valve system in the World! Our Kerick valves have been field tested in water bowls from the Southern U.S. to the farthest points north in Canada. We encounter all types of water containing sodium, salt, gas, oil, algae, and rust Kerick does not corrode or build up inside which causes seepage. Coupled with our Stainless Steel float balls and stainless float arms, this system is fool proof!
|
|
|
|
| CANCRETE’s 5 Year Warranty (3 Year Full Replacement on Hulls) shows we have confidence in our product. |
To find a Cancrete distributor near you click here
|
|
|
|
|
|
|
